Wurth Power Spray Glue Plus - Spray Adhesive

Save 13%

Price:
Sale price£25.99 Regular price£29.99

Description

Wurth Power Spray Glue Plus - Spray Adhesive

Contact adhesive with high immediate adhesive strength and high temperature resistance

Excellent heat resistance up to 110°C 

Long-lasting secure hold in a variety of applications

Fast-drying

Shorter processing time, as further processing of the material can occur more quickly

Spray head adjustable in 2 positions
Horizontal and vertical
Spray jet width
Extremely flexible in a wide variety of working situations thanks to the optimum setting and application options

Transparent hardening
Colourless bonding
No colour seepage due to transparent curing with thin adhesive application


Notice
After use, turn the can on its head and spray until the valve is empty.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

 

Application area
Suitable for gluing fabric, polyether/polyester foam, foam rubber profiles, insulation materials, roof lining material, leather, felt, cardboard (together or onto rubber), metal (raw, phosphated, annealed, primed and painted, anodised), wood materials and polyester materials. Also suitable for gluing PE film (e.g. as sheeting for spray water protection inside car doors). This spray adhesive can also be used for finishing purposes and for linings (car roof linings).

Instructions
Thoroughly clean surfaces to be adhered and then spray them. Spray absorbent surfaces until they are saturated. The spraying distance should be approx. 15–25 cm. Allow to flash off for between 5–15 min. (depending on temperature, material and application) and join.

 

Safety Data Sheet 

 

Technical Information

 

Chemical basis

Synthetic rubber

Colour

Transparent

Density

0.85 g/ml

Smell/fragrance

Characteristic

Min./max. processing temperature

0 to 30 °C

Min./max. temperature resistance

-20 to +110 °C

Min. flashing point

-24 °C

Min./max. flash-off time

5 min-15 min

Min./max. spraying distance

15-25 cm

Contents

400 ml

Weight of content

288 g

Shelf life from production

12 Month

Silicone-free

Yes

You may also like

Save 40%
uPOL Raptor Universal Thinner FAST DRYING S2044 System 20 uPoluPOL Raptor Universal Thinner FAST DRYING S2044 System 20 uPol
uPol uPOL Raptor Universal Thinner FAST DRYING S2044 System 20
Sale priceFrom £11.99 Regular price£19.99
Save 19%
uPOL Raptor EPOXY PRIMER 2K Anti-Corrosive AEROSOL 400ml BIEGE uPoluPOL Raptor EPOXY PRIMER 2K Anti-Corrosive AEROSOL 400ml BIEGE uPol
uPol uPOL Raptor EPOXY PRIMER 2K Anti-Corrosive AEROSOL 400ml BIEGE
Sale priceFrom £25.99 Regular price£31.99
Save 13%
Wurth Gloves Pack LARGE Powder Free BLACK WurthWurth Gloves Pack LARGE Powder Free BLACK Wurth
Wurth Wurth Gloves Pack LARGE Powder Free BLACK
Sale priceFrom £25.99 Regular price£29.99

Recently viewed