Wurth All-In-One Anearobic Sealant 50g

Save 15%

Price:
Sale price£27.99 Regular price£32.99

Description

Wurth All-In-One Anaerobic Sealant 50g

Medium strength, anaerobic curing and thixotropic adhesive and sealant

ALL IN ONE can be used as a thread lock or pipe seal, as a sealant for flanges and housings and for fixing bearings to rods or shafts.

Features

  • Removable with hand tools
  • Prevents rust and corrosion
  • Heat-resistant up to 150°C
  • Even curing on a variety of metals, including stainless steel and most metal-plated fasteners
  • High degree of resistance to solvents

 

ALL IN ONE fulfils the following requirements

  • NSF Category FDA P1 for indirect food contact
  • ANSI Standard 61 for use in drinking water systems
  • DVGW certification for gas pipe applications (DIN EN 751-1)
  • KTW approval (plastics in contact with drinking water)

 

Benefits when used as screw retainer

  • Prevents unwanted movements, loosening, leaks
  • Ideal for adjusting screws, calibration screws, gauges and for fasteners up to M80
  • Resistant to vibration
  • Used to fill cracks and gaps

 

Benefits when used as a pipe sealant

  • For sealing all metallic pipe connections and fittings
  • Does not shrink and does not block systems
  • The seal withstands vibration and shock loads
  • Seals against conventional gases and fluids
  • The product is available with drinking water and gas approvals
  • Prevents corrosion and seizing
  • Seals fittings with threads up to 3 inches and is heat resistant up to 150°C

 

Benefits when used as a surface sealant

  • For sealing flanges and surfaces
  • Replaces solid seals - reduces stock
  • Fills gaps up to 0.5 mm
  • No settling effects
  • Withstands high pressure after complete curing

 

Benefits when used for bearing locking

  • For fastening cylindrical connecting parts
  • Reduces or eliminates expensive machining operations due to the possibility of greater tolerances
  • Eliminates specific surface finishing requirements
  • Prolongs the life of the equipment through better fatigue resistance and corrosion resistance
  • Completely fills gaps and ensures full material contact

Instructions

The all-in-one product cures where there is no air present. For optimal performance, parts should be dry and free of oil, dirt and grease. Apply product in sufficient quantity to fill all inserted parts; fit parts and tighten immediately.

 

Product information

Würth Catalogue (1)

 

 Catalogue page as PDF 1

 

Datasheets (1)

 

 Safety data sheet

 

Chemical basis

Dimethacrylic acid ester

Colour

Yellow fluorescent

Density

1.05 g/cm³

Min./max. viscosity 1

55000-80000 mPas

Max. gap-filling ability

0.50 mm

Min. flashing point

100 °C

Min./max. initial strength

15-30 min

Min./max. final strength

3 h-6 h

Min./max. functional strength

1-3 h

Min./max. breakaway torque

10-20 Nm

Min./max. processing temperature

-55 to 150 °C

Shelf life from production

18 Month

Shelf life from production/conditions

18 Month / at -5°C to 35°C

You may also like

Save 40%
uPOL Raptor Universal Thinner FAST DRYING S2044 System 20 uPoluPOL Raptor Universal Thinner FAST DRYING S2044 System 20 uPol
uPol uPOL Raptor Universal Thinner FAST DRYING S2044 System 20
Sale priceFrom £11.99 Regular price£19.99
Save 19%
uPOL Raptor EPOXY PRIMER 2K Anti-Corrosive AEROSOL 400ml BIEGE uPoluPOL Raptor EPOXY PRIMER 2K Anti-Corrosive AEROSOL 400ml BIEGE uPol
uPol uPOL Raptor EPOXY PRIMER 2K Anti-Corrosive AEROSOL 400ml BIEGE
Sale priceFrom £25.99 Regular price£31.99
Save 13%
Wurth Gloves Pack LARGE Powder Free BLACK WurthWurth Gloves Pack LARGE Powder Free BLACK Wurth
Wurth Wurth Gloves Pack LARGE Powder Free BLACK
Sale priceFrom £25.99 Regular price£29.99

Recently viewed