Hempel Thinners No.1 811 750ml GENERAL single part
White spirit based thinner containing paint conditioner for use with products below.
-used principally with varnish,brilliant enamel,bilge and locker and multicoat,and primers
-brush,roller or spray
-Ideal panel prep
Suitable for use with :
For spray application of single pack Top Coats refer to Hempel Thinners 808 (No3)
For Use With HEMPELS one component primers, topcoats and varnishes (thinner and tool cleaner)
It is important that only the recommended Thinners are used for each application, failure to do so will result in a ruined job. Substituting other proprietary products will also result in failure. Several products have a choice of Thinners depending on the application method to be used.
As a general rule, thinning should be kept at a minimum as the quality of the paint work will suffer from too liberal thinning. However, if application is to take place at high temperatures (air and/or steel), thinning may even beyond the limits mentioned on the data sheets exceptionally be necessary in order to avoid dry spray and poor film formation. Hempel paint is produced and supplied in such a way that thinning is normally not necessary provided the paint is properly mixed/stirred. However, if the paint is to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather, the HEMPEL THINNER(s) indicated on the product data sheet may be added to obtain a consistency most suitable for application.
The solvents/thinners used in some paints can dissolve plastics, make sure that your painting tools can
stand the kind of solvent you are using and be careful with any plastic containers you may be using.
|Hempel Thinners 811 (No 1) Technical Datasheet|
|Hempel Thinners 811 (No1) Safety Datasheet|
|Hempel Paint Manual|
|Thinner No. 1 (811)||Thinner and tool cleaner for single component primers, topcoats and varnishes.|
|Thinner No. 2 (871)||Brush application and tool cleaner for Hempel’s two-component polyurethane paint and Diamond Varnish.|
|Thinner No. 3 (808)||Thinner and tool cleaner for Hempel’s Antifoulings, Non-Slip Deck Coating and spray thinner for 1K topcoat.|
|Thinner No. 5 (845)||Thinner for Hempel's 2 Part Light Primer.|
|Thinner No. 6 (851)||Spray application and tool cleaner for Hempel’s 2 component polyurethane paint and Diamond Varnish.|
|Thinner No. 7 (852)||Spray thinner for Hempel's Ocean Gloss 55500 (20°/30°).|