Hempel PROFAIR EPOXY FILLER 1L two part

Save 25%

Price:
Sale price£44.99 Regular price£59.99

Description

Hempel Paint PROFAIR EPOXY FILLER 1L two part

A lightweight two component epoxy filler, with good adhesion and water resistance and, when fully cured, easy to sand. 

500ml Profair

500ml Curing Agent

Can be applied in coats up to 25mm without sagging and is especially suited for detailed faring where structural strength and flexibility is required.

  • Suitable on glass fibre, hardwood, steel and other rigid materials 
  • For use above and below the waterline 
  • Size: 1Ltr 
  • Pot Life at 20°C: Mixed product 1hr
  • Mix Ratio: 1:1 
  • Minimum Application Temperature: 5°C 
  •  Coverage: 1sq.m per Ltr 
  • Tool Cleaner: Thinners No.5

 

Hempel's Profair 35290 is a lightweight two-component, epoxy filler with good adhesion and water resistance. Easy to sand when fully cured.

1. As a filler and fairing compound for profiling large areas.

2. For detailed fairing where structural strength and flexibility is required.

3. Can be applied to a film thickness up to 25 mm without sagging.

A two pack, epoxy filler for use above and below the waterline. Base 65ml - 130ml mixed volume.

A 2-component epoxy sealer with low viscosity and good penetration ability.

It is ideal for use on porous surfaces, such as wood and plywood, as it seals pores and thus provides a good base for further painting.

Subsequent painting does not seep into the wood as a result. Can be painted over with Hempel Light Primer, Underwater Primer and clear coats.

For indoor and outdoor use above and below the waterline. All surfaces must be clean, free of oil and dry. Mixing ratio: 4:1. dilution: THINNER 845 (n° 5). 

Colour: Transparent.

Preparation and Applications:

  • Ensure all surfaces are clean, oil free and dry.
  • Clean with Degreaser or Yacht Cleaner.
  • Stir all products well before use.
  • If overcoating times are exceeded, abrade the surface and wash off with fresh water.

On a previously coated surface:

  1. Abrade to remove loose matter and provide a suitable key.
  2. Wash surface with fresh water and allow to dry.
  3. Apply Epoxy Filler up to a thickness of 5mm, fair before overcoating with the relevant primer.

On a previously uncoated surface:

  1. Apply one or two coats of Primer before applying Epoxy Filler, then apply further coats of Primer.
  2. Apply 2 coats of Bilge and Locker Paint.
  3. Thinners can be used to assist application under certain conditions.

Mixing: Immediately before use, mix equal parts of the two components until a uniform colour is obtained. Avoid bubbles in the mixture.

Application method: Filler knife, spatula, trowel Coverage: 1m²/ 1L @ 1mm thickness Minimum application temperature: 5ºC / 40ºF

Suitable on glass fibre, hardwood, steel and other rigid materials. For interior and exterior use above and below the waterline.

Suitable on glass fibre, hardwood, steel and other rigid materials.

For interior and exterior use above and below the waterline.

Sold as 1kg (two separate 500g tins)

Features:

1: As a filler and fairing compound for profiling large areas.

2: For detailed fairing where structural strength and flexibility is required.

3: Can be applied to a film thickness up to 25 mm without sagging.

Hempel’s ProFair Filler is a light weight two component epoxy filler, with good adhesion and water resistance, and when fully cured easy to sand.  Can be applied in coats up to 25mm without sagging. Especially suited for detailed faring where structural strength and flexibility is required.  Suitable on glass fibre, hardwood, steel and other rigid materials. For use above and below the waterline.

Application Methods : 

Temp     Touch Dry Recoat (min/max) Thinners / Tool Cleaner      Coverage
10°c 24 hrs 48 hrs  - none Thinners No: 5 1m2/ltr
20°c 12 hrs      24 hrs - none   1m2/ltr

 

Download Product Datasheet here.

Download Paint Manual here.

You may also like

Save 40%
uPOL Raptor Universal Thinner FAST DRYING S2044 System 20 uPoluPOL Raptor Universal Thinner FAST DRYING S2044 System 20 uPol
uPol uPOL Raptor Universal Thinner FAST DRYING S2044 System 20
Sale priceFrom £11.99 Regular price£19.99
Save 19%
uPOL Raptor EPOXY PRIMER 2K Anti-Corrosive AEROSOL 400ml BIEGE uPoluPOL Raptor EPOXY PRIMER 2K Anti-Corrosive AEROSOL 400ml BIEGE uPol
uPol uPOL Raptor EPOXY PRIMER 2K Anti-Corrosive AEROSOL 400ml BIEGE
Sale priceFrom £25.99 Regular price£31.99
Save 13%
Wurth Gloves Pack LARGE Powder Free BLACK WurthWurth Gloves Pack LARGE Powder Free BLACK Wurth
Wurth Wurth Gloves Pack LARGE Powder Free BLACK
Sale priceFrom £25.99 Regular price£29.99

Recently viewed