Wurth Adhesive for Plastic 50ml REPLAST® EASY TRANSPARENT Bodywork

Save 24%

Price:
Sale price£18.99 Regular price£24.99

Description

Wurth Adhesive for Plastic 50ml REPLAST® EASY TRANSPARENT Bodywork

08935008

For easily bonding plastic parts or repairing lamp housings, for example.

Instructions

The substrate must be capable of bearing loads and must be clean, dry and free from grease and rust. Old adhesive residues must also be removed. Observe the processing instructions. For more information, refer to the technical data sheet.

For colourless bonding of transparent or coloured plastic parts

An adhesive for virtually every type of plastic

  • No need for inconvenient use of different types of adhesive
  • Can be used for repairs and fast attachment

Special positive mixer

  • Optimum mixing with minimum volumes
  • Low adhesive loss (waste)

Outstanding resistance to chemicals

Free of solvents

 

Contents

50 ml

Container

Cartridge

Chemical basis

Two-component polyurethane

Processing time

3 min

Colour

Transparent

Density

1.24 g/cm³

Min./max. processing temperature

15 to 25 °C

Min./max. temperature resistance

-35 to +90 °C

Shelf life from production/conditions

12 Month / at 23°C and 50% relative humidity, no exposure to direct sunlight

Min. combined tension and shear resistance

4 N/mm²

Shore D hardness

30

Materials to bond

Polycarbonate (Plastic)
PMMA (Acrylic glass, Plexiglas) (Plastic)

Properties of the adhesive

Elastic bonding
Fast fixing

 

 

 

Notice

Not suitable for PE (polyethylene), PP (polypropylene) or PTFE (polytetrafluoroethylene). There may be adhesion problems in individual cases due to the coatings and release agents used in some cases in the plastic production process. Check material compatibility on a non-visible area if necessary.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

 

Product information

Würth Catalogue (1)

 Catalogue page as PDF 1  |  2

 

Datasheets (1)

 Safety data sheet

 

You may also like

Save 40%
uPOL Raptor Universal Thinner FAST DRYING S2044 System 20 uPoluPOL Raptor Universal Thinner FAST DRYING S2044 System 20 uPol
uPol uPOL Raptor Universal Thinner FAST DRYING S2044 System 20
Sale priceFrom £11.99 Regular price£19.99
Save 19%
uPOL Raptor EPOXY PRIMER 2K Anti-Corrosive AEROSOL 400ml BIEGE uPoluPOL Raptor EPOXY PRIMER 2K Anti-Corrosive AEROSOL 400ml BIEGE uPol
uPol uPOL Raptor EPOXY PRIMER 2K Anti-Corrosive AEROSOL 400ml BIEGE
Sale priceFrom £25.99 Regular price£31.99
Save 13%
Wurth Gloves Pack LARGE Powder Free BLACK WurthWurth Gloves Pack LARGE Powder Free BLACK Wurth
Wurth Wurth Gloves Pack LARGE Powder Free BLACK
Sale priceFrom £25.99 Regular price£29.99

Recently viewed